
FRAMES 5008P THRU 5811PH - TOTALLY ENCLOSED AND EXPLOSION PROOF MOTORS
TYPES: EV4, JV4, JVC4, JVCE4, JVCI4, JVE4, JVEI4, NVCE4, NVE4
SOLIDSHAFT MOTORS (3600 RPM ONLY)

ITEM NO. | QTY | NAME OF PART |
| 1 | 1 | Canopy Cap |
| 2 | 2 | Hex Head Cap Screw & Lockwasher |
| 3 | 2 | Eyebolt |
| 4 | 1 | Fan Cover |
| 5 | 4 | Hex Head Cap Screw & Lockwasher |
| 6 | 1 | Shround Assembly (Fan) |
| 7 | 8 | Hex Head Cap Screw & Lockwasher |
|
|
ITEM NO. | QTY | NAME OF PART |
| 8 | 1 | Fan (Propeller) |
| 9 | 1 | Snap Ring |
| 10 | 1 | Woodruff Key |
| 11 | 1 | Upper Bracket Assembly (Includes item 12) |
| 12 | 1 | Oil Retaining Tube |
| 13 | 8 | Hex Head Cap Screw & Lockwasher |
| 14 | 1 | Special Plug |
|
WARNING:
Any disassembly or repair work on explosionproof motors will void the Underwriters Laboratories, Inc.
label unless done by the manufacturer, or a facility approved by the Underwriters Laboratories, Inc.
Refer to your nearest U.S. Elecrical Motors office for assistance. |
|
BEARINGS:
Refer to motor nameplate for the bearing numbers. |
|
PRICES:
Parts stocking distributors: refer to USEM renewal parts numerical index.
All Others: refer to your nearest USEM parts distributor. |
| reference: Renewal Parts Section 700, Pages 161 & 162 |

FRAMES 5008P THRU 5811PH - TOTALLY ENCLOSED AND EXPLOSION PROOF MOTORS
TYPES: EV4, JV4, JVC4, JVCE4, JVCI4, JVE4, JVEI4, NVCE4, NVE4
SOLIDSHAFT MOTORS (3600 RPM ONLY)
ITEM NO. | QTY | NAME OF PART |
| 15 | 1 | Special Housing |
| 16 | 1 | Sight Guage Window |
| 17 | 2 | Gasket |
| 18 | 1 | Reflector Disc |
| 19 | 4 | Oval Head Screw |
| 20-25 | | NOT USED IN THIS ASSEMBLY |
| 26 | 1 | Nipple Fitting |
| 27 | 1 | Drain Cap |
| 28 | 1 | Gasket |
| 29 | 1 | Filter Assembly |
| 30 | 1 | Hex Countersunk Pipe Plug |
| 31 | 1 | Special Pulg |
| 32 | 1 | Hex Countersunk Pipe Plug |
| 33 | 1 | Oil Tube Assembly |
| 34 | 1 | Male Connector |
| 35 | 1 | Cooling Coil Assembly |
| 36 | 4 | Clamp (Coil) |
| 37 | 4 | Hex Head Cap Screw & Lockwasher |
| 38 | 1 | Male Connector |
| 39 | 1 | Hex Exchanger Plate |
| 40-45 | | NOT USED IN THIS ASSEMBLY |
| 46 | 1 | Gasket |
| 47 | 8 | Hex Head Cap Screw & Lockwasher |
| 48 | 1 | Locknut |
| 49 | 1 | Special Nut |
| 50 | 4 | Hex Head Cap Screw & Lockwasher |
| 51 | 1 | Bearing Mounting |
| 52 | 1 | Oil Pan |
| 53 | 4 | Hex Nut |
| 54 | 1 | Upper Bearing Cap |
| 55 | 4 | Stud |
| 56 | 4 | Hex Head Cap Screw & Lockwasher |
| 57 | 1 | Ball Bearing (Refer to section 775) |
| 58 | 1 | Bearing Spacer Set |
| 59 | 1 | Ball Bearing (Refer to section 775) |
| 60-65 | | NOT USED IN THIS ASSEMBLY |
| 66 | 1 | Locknut |
| 67 | 2 | Socket Set Screw |
| 68 | 1 | Square Key |
| 69 | 1 | Cap Plug |
|
|
ITEM NO. | QTY | NAME OF PART |
| 70 | 1 | Upper Air Deflector |
| 71 | 8 | Hex Head Cap Screw & Lockwasher |
| 72 | 1 | Rotor Assembly (includes items 73 - 75) |
| 73 | 1 | Rotor Shaft |
| 74 | 1 | Key |
| 75 | 1 | Rotor Core |
| 76 | 1 | Wound Stator Assembly |
| 77 | 1 | Shroud (Not Illustrated) |
| 78 | 8 | Hex Head Cap Screw & Washer (Not Illustrated) |
| 79 | 1 | Gasket (Outlet Box Base) (JV4 Only) |
| 80-85 | | NOT USED IN THIS ASSEMBLY |
| 86 | 1 | Outlet Box Base |
| 87 | 4 | Hex Head Cap Screw & Washer |
| 88 | 4 | Washer (JV Only) |
| 89 | 1 | Hex Countersunk Pipe Plug (JV4 Only) |
| 90 | 1 | Gasket (Outlet Box Cover) (JV4 Only) |
| 91 | 1 | Outlet Box Cover |
| 92 | 8 | Hex Head Cap Screw (Outlet Box Cover) |
| 93 | 1 | Lower Bracket Assembly (Includes item 94) |
| 94 | 1 | Oil Retaining Tube |
| 95 | 8 | Hex Head Cap Screw & Lockwasher |
| 96 | 1 | Special Plug |
| 97 | 1 | Special Housing |
| 98 | 1 | Sight Gauge Window |
| 99 | 2 | Gaskets |
| 100 | 1 | Reflector Disc |
| 101 | 4 | Oval Head Screw |
| 102 | 1 | Nipple Fitting |
| 103 | 1 | Drain Cap |
| 104 | 1 | Gasket |
| 105-110 | | NOT USED IN THIS ASSEMBLY |
| 111 | 1 | Lower Air Deflector |
| 112 | 8 | Hex Head Cap Screw & Lockwasher |
| 113 | 1 | Lower Bearing Cap |
| 114 | 1 | Gasket |
| 115 | 3 | Hex Head Cap Screw & Lockwasher |
| 116 | 1 | Bearing Mounting |
| 117 | 1 | Lower ball Bearing (Refer to section 775) |
| 118 | 1 | Baffle Plate |
| 119 | 1 | Water Deflector |
|
WARNING:
Any disassembly or repair work on explosionproof motors will void the Underwriters Laboratories, Inc.
label unless done by the manufacturer, or a facility approved by the Underwriters Laboratories, Inc.
Refer to your nearest U.S. Elecrical Motors office for assistance. |
|
BEARINGS:
Refer to motor nameplate for the bearing numbers. |
|
PRICES:
Parts stocking distributors: refer to USEM renewal parts numerical index.
All Others: refer to your nearest USEM parts distributor. |
| reference: Renewal Parts Section 700, Pages 161 & 162 |

Home
Email
Copyright © 2005 Emerson Electric Co. All rights
reserved